Sennheiser SK 500 G3 Wireless Transmitter
More usable systems per range.
As the pros have known for years, having the option of lowering a transmitter’s RF output power helps immensely when simultaneously operating a large number of wireless systems.
This transmitter also features wireless sync to link up to a compatible G3 receiver automatically with a push of a button. The revised backlit display provides a wealth of useful information at a glance, even on the darkest of stages.
1 SK 500 G3 bodypack transmitter
1 protective pouch
2 batteries
Operating instructions
Sturdy metal housing
42 MHz bandwidth: 1680 tuneable UHF frequencies for interference-free reception
Enhanced frequency bank system with up to 32 compatible frequencies
Pilot tone squelch for eliminating RF interference when transmitter is turned off
Enhanced AF frequency range
Increased range for audio sensitivity
Wireless synchronization of transmitters via infrared interface from receiver
User-friendly menu operation with more control options
Illuminated graphic display
Auto-Lock function avoids accidental changing of settings
HDX compander for crystal-clear sound
Transmitter features battery indicatation in 4 steps, also shown on receiver display Programmable Mute function
Contacts for recharging BA 2015 accupack directly in the transmitter
Wide range of accessories adapts the system to any requirement
|
RF frequency range |
516..... 865 MHz
|
|
Transmission frequencies |
1680 (max. 20 Presets)
|
|
Switching bandwidth |
42 MHz
|
|
Peak deviation |
+/- 48 kHz
|
|
Compander |
HDX
|
|
Frequency response (microphone) |
80.....18000 Hz
|
| Signal-to-noise ratio |
> 115 dB(A)
|
|
THD, total harmonic distortion |
< 0,9 %
|
| In compliance with |
ETS 300422 , ETS 300445 , CE , FCC
|
| Audio-XLR connector |
3,5 mm jack
|
| RF output power |
10/30 mW
|
|
Operating time (transmitter) |
> 8 h
|
|
Input voltage range |
1,8 V line
|
|
Input voltage range |
max. 3,0 V eff line
|
|
Dimensions (Transmitter) |
82 x 64 x 24 mm
|
|
Weight (Transmitter) |
~ 160 g
|