Search
GO

Audio Technica U841A

Omnidirectional condenser boundary microphone

Availability: In stock

£215.00 (Excl. VAT) £258.00 (Incl. VAT)
prev
next
close
Audio Technica U841A
  • Audio Technica U841A Omnidirectional condenser boundary microphone


    The U841A delivers exceptionally intelligible audio reproduction in a super-compact, low-profile design.


    Equipped with UniGuard® RFI-shielding technology, this omnidirectional condenser boundary microphone is designed for clear, highly intelligible sound reinforcement, professional recording, television and conferencing in surface-mount applications.


    The U841A has a 360° pickup angle and operates on battery or phantom power.

Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations

 

UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)

 

UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality

 

Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance

 

Heavy die-cast case and silicon foam bottom pad minimize coupling of surface vibration to the microphone

 

Low-profile design with low-reflectance black finish for minimum visibility

 

Operates on battery or phantom power

 

 

Element

 

Fixed-charge back plate permanently polarized condenser

 

Polar Pattern

 

Omnidirectional in hemisphere above mounting surface

 

Frequency Response

 

30-20,000 Hz

 

Low Frequency Roll Off

 

80 Hz, 18 dB/octave

 

Open Circuit Sensitivity

 

Phantom: -39 dB (11.2 mV) re 1V at 1 Pa Battery: -40 dB (10.0 mV) re 1V at 1 Pa

I

mpedance: Phantom

 

200 ohms Battery: 270 ohms

 

Maximum Input Sound Level

 

Phantom: 132 dB, 1 kHz at 1% T.H.D. Battery: 122 dB SPL, 1 kHz at 1% T.H.D.

 

Dynamic Range: Phantom

 

111 dB, 1 kHz at Max SPL Battery: 101 dB, 1 kHz at Max SPL

 

Signal to Noise Ratio

 

73 dB, 1 kHz at 1 Pa

 

Phantom Power Requiremens

 

11-52V DC, 2 mA typical

 

Battery Type

 

1.5V AA/UM3

 

Battery Current Life

 

0.4 mA / 1200 hours typical (alkaline)

 

Switch

 

Off, on-flat, on-roll-off

 

Cable

 

25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector

 

Accessories

 

AT8531 power module; battery; soft protective pouch